Blair's Texas Window Tinting & more's  (972) 783-6005 or Email us
Paint Protective Film Installation Instructions    Next

We will demonstrate installing the hood section here on this Volkswagen Passat. It's basically a regular, average, garden variety installation that most could perform provided the proper instructions are followed. We removed the license plate frame and have the car clean.

 This is a typical garden variety installation

Basic Tools Needed
tools_needed.jpg (45165 bytes)

These are the basic tools you will need to accomplish most all jobs:

1. Squeegee that comes with your kit.

2. A common hair drier (not a heat gun).
3. Trigger Sprayer mixed according to the instructions that comes with your mounting solution concentrate (concentrate comes with your kit).

4. Patience.

 Step 1 Check the piece you actually have in your hands...

Before starting your application, Make sure you have the correct piece in your hands for the intended application you are about to perform. Also check this correct piece section for accuracy and determine here exactly how you want lay this piece on in conjunction with the edges of the hood.

 

Click Here to proceed to next page

 Make sure you are not peeling the wrong piece from your kit
  Paint Protection Film   Next
You are viewing page 1 now  Page 2  Page 3  Page 4  Page 5
Pre-cut .O.E.M. General Installation Manual Un-Cut    O.E.M. General Installation Manual

 

This Paint Protection Film Website is being updated at this time. Please excuse any messes you might see here. We're peddling as fast as we can..... Thanks for your patience.